4100H-FS Hercules FS Pallet Wrapper

Brochure

PRODUCTION SPEED:

• 1-40 loads per hour
  • NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

LOAD CAPACITY:

• Maximum load weight:
  • Unlimited (floor supported)
• Maximum load size:
  • 56″ W x 56″ L (79″ max. load diagonal) x 80″ H (plus up to 4″ top overlap)

ROTARY ARM:

• 20″ diameter ring bearing support
• ANSI # 60 direct chain drive c/w chain tensioner
• 3-15 RPM rotational speed c/w soft start acceleration
• Final revolution deceleration and positive stop alignment
• 3/4 HP DC variable speed motor

FILM CARRIAGE ELEVATOR:

• 1/2 HP AC variable speed motor
• ANSI # 40 direct chain drive c/w shock dampener
• Maintenance free 12 point carriage guidance system

FILM DELIVERY SYSTEM:

• NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
• Special Film Threading Device
  • Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load
• 1/2 HP AC variable speed motor
• Fully electronic dynamic dancer corner compensation
• 33% to 313% fixed stretch capability
• Pre-stretch ratio variable using easy sprocket change
• Rapid Thread ™ Safety Door with auto power cut-off switch
• Superior film-to-roller contact area
• Lifetime warranty on pre-stretch rollers

ELECTRICAL INPUT:

• 115 Volts 1 Phase 60 Hz 20 Amps

MISCELLANEOUS OPTIONS:

• Automatic Film Cutter – Automatically cuts the film at the end of the cycle eliminating the need for the driver to leave the fork-lift and having to bend over to cut the film. Saves time and reduces the chance of injury.
• Auto Film Start – Reduce the number of times the operator must bend over to attach and cut the film by 50% with a wireless remote. Cut the chance of injury in half.
• Starter Spare Parts Kit – recommended minimum quantity of parts to stock for this specific machine
• 48″ W x 48″ L x 4″ H pallet platform – decreases maximum wrap height by 4″
• Cold Weather Package – down to 32°F
• Freezer Package (34° F to -20° F) – specify minimum temperature
• Dusty Package – Complete sealing of the control panel and use of sealing rings on any conduit entries into the control panel
• Side Safety Fences – Set of 2 mounted each side between frame posts
• Rear Safety Fence – closes off back side of machine
• Safety Fence Front Sliding Gate c/w interlock switch to suit standard frame size
• Broken film/out of film detection with automatic machine reset and fault indication
• 30” film carriage – accommodates standard 20” and 30” wide films
• AC variable speed drives in place of standard DC
• Height extension for 110” tall loads (80” is standard) – other extensions available – contact us for pricing
• Frame extension for maximum 86” diagonal (79” is standard) – other extensions are available – contact us for pricing

LOAD CELL & SCALE PACKAGES:

• SureWeigh platform scale 4’ x 4’ w/GSE250 indicator for stand-alone use (includes 2 x Y189 floor mount brackets)
• 41 SureWeigh platform scale 5’ x 5’ w/GSE250 indicator for stand-alone use (includes 2 x Y189 floor mount brackets)
• Upgrade digital weight indicator from GSE250 model to Matrix 365. The standard model GSE250 indicator is for load weight only and communication features are not available. Matrix 365 indicators have programming features for printers and communication capability

AIR FLOW & PALLET LOCK:

• Automatic Slitting and or Roping Device – A wide variety of automatic film slitting and or roping devices are available upon request
• Pallet Lock Roping Device – the most effective method of securing the load to the pallet. Easily programmed using the standard Microprocessor and touchscreen to apply the roped or normal full web film for additional holding force where needed, air flow if required and to prevent film breakage on sharp product or pallet corners
• Delete the filter-regulator unit and loose-shipped quiet air compressor included in option OPLRD if customer supplies the necessary pneumatic requirement.

CONTROL:

• Simple to operate PANASONIC PLC with Touchscreen Operator Interface
• Power Off – On – Reset switch & Power On indicator light
• Single button Auto Wrap Cycle Start/Pause
• Cycle Pause for applying top sheets
• Base or Top Wraps First program
• Reinforce Wrap control for mid-wrapping
• Up Only or Up/Down wrap program
• Emergency Stop button
• Rotary Arm Jog switch
• Film Carriage Lower & Raise buttons
• Film tension (Force-to-Load) control
• Separate film carriage raise & lower speed controls
• Variable rotary arm speed control
• Rotary arm and carriage elevator dynamic braking system
• Triple beam type auto load height sensing photo-eye, detects dark or shiny loads
• Separate 1 to 12 revolution top & bottom wrap control
• NEMA 12 control panel enclosure
• Dust tight slip ring assembly
• Non-proprietary UL/CSA approved components

STRUCTURAL:

• Heavy duty structural steel construction
• Four (4) post free-standing floor mounted design
• Electro-static powder coated paint finish

SAFETY:

• Rotary Arm Obstruction Emergency Safety Stop Sensor