The HP-2100 is a semi-automatic stretch wrapper with a variety of features and high-tech components that allow for secure pallet wrapping at a low, affordable price.
2100-SRT Pallet Wrapper (High Profile)
The HP-2100 is a semi-automatic stretch wrapper with a variety of features and high-tech components that allow for secure pallet wrapping at a low, affordable price.
Category: Semi-Automatic Turntable
Brochure
PRODUCTION SPEED:
- 35 loads per hour throughout (Single Turntable)
- NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
LOAD CAPACITY:
- Maximum load weight:
- 4,000 lbs dynamic – 10,000 lbs static
- Maximum load size to safely clear the tower:
- 56” x 56” (79” diagonal) x 75” H
TURNTABLE:
- 48″ octagonal 5/16″ thick formed steel plate turntable
- 4 point caster support system
- Turntable height 11″ from floor
- ANSI # 50 direct chain drive c/w chain tensioner
- 3-12 RPM rotational speed c/w soft start acceleration
- 1/2 HP AC variable speed motor
- Final revolution deceleration and positive stop alignment
- Front and back forklift ports for easy movement
- Accu-Count exact turntable positioning system for additional film savings!
FILM CARRIAGE ELEVATOR:
- 1/2 HP AC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
- Maintenance free carriage guidance system
FILM DELIVERY SYSTEM:
- Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
- Special Film Threading Device
- Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load
- 1/2 HP AC variable speed motor
- Fully electronic dynamic dancer corner compensation
- 33% to 313% fixed stretch capability
- Pre-stretch ratio variable using easy sprocket change
- Carriage Descent Obstruction Safety Shut-Off Device
- Rapid Thread ™ Safety Door with auto power cut-off switch
- Side mounted film carriage for operator convenience and safety
- Superior film-to-roller contact area
- Lifetime warranty on pre-stretch rollers
ELECTRICAL INPUT:
- 115 Volts 1 Phase 60 Hz 15 Amps
MISCELLANEOUS OPTIONS:
- Starter Spare Parts Kit – recommended minimum quantity of parts to stock for this specific machine
- Ramp for manual pallet jack loading – 48” W x 60” L
- Powered pallet jacks may require a Porch Extension Option detailed below
- 24” L x 48” W Porch Extension – for powered pallet jacks
- 40” L x 48” W Porch Extension – for powered pallet jacks
- Tower Extension – for 110” wrap height capability (standard is 80”)
- NOTE: All machines with tower extensions will be hinged and shipped knocked-down.
- 2ft. Base Extension – for maximum 119” diagonal (71” diagonal is standard)
- Dusty Package – Complete sealing of the control panel and use of sealing rings on any conduit entries into the control panel
- Cold Weather Package – down to 33°F
- Freezer Package (32° F to -20° F) – specify minimum temperature
- Beacon Light with Red & Green Lens – indicates run, clear or fault conditions
- 30” film carriage – accommodates standard 20” and 30” wide films
- Dual Turntables – add second turntable to increase production.
- NOTE: Includes a Turntable Left-Right momentary selector switch with indicator lights to show the currently selected turntable and magnetic latching relay
LOAD CELL & SCALE PACKAGES:
- Built-in Load Cells Scale Package – with GSE250 Digital Weight Indicator
- NOTE 1: If to be used with pallet jacks the OSCBIRMP Scale Ramp option is required
- NOTE 2: Machine with base extension option requires a factory quote
- NOTE 3: Not legal for trade – upgrade available as a factory quote
- Built-In Load Cells Scale Package Ramp – 72” L x 48” W for use with built-in load cells
- Upgrade digital weight indicator from GSE250 model to Matrix 365. The standard model GSE250 indicator is for load weight only and communication features are not available. Matrix 365 indicators have programming features for printers and communication capability
- 24” L x 48” W scale porch extension for use with built-in load cells
- 40” L x 48” W scale porch extension for use with built-in load cells
AIR FLOW & PALLET LOCK:
- Film splitter – 20” – manual device to split a 20” roll of film into two (2) 10” wide webs, includes a manually adjustable roping device that “ropes” the film webs to the desired size before being applied to load
- Film splitter – 30” – manual device to split a 30” roll of film into three (3) 10” wide webs, includes a manually adjustable roping device that “ropes” the film webs to the desired size before being applied to load. Includes OP30 30” film carriage option
- Pallet Lock Roping Device – the most effective method of securing the load to the pallet. Easily programmed using the touchscreen to apply the roped or normal full web film for additional holding force where needed, air flow if required and to prevent film breakage on sharp product or pallet corners
- NOTE: AIR REQUIRED – Includes a filter-regulator unit and loose-shipped quiet air compressor
- Delete the filter-regulator unit and loose-shipped quiet air compressor included in option OPLRD if customer supplies the necessary pneumatic requirement
MISCELLANEOUS OPTIONS:
- Starter Spare Parts Kit – recommended minimum quantity of parts to stock for this specific machine
- Tower Extension – for 105” wrap height capability (standard is 75”) for the HP model
- NOTE: All machines with tower extensions will be hinged and shipped knocked-down
- 5” tower pedestal for HP models – adds 5” to wrap height (standard is 75”)
- Split Base Frame – to accommodate scale or larger loads
- 2ft. Base Extension – for maximum 127” diagonal (79” diagonal is standard)
- Dusty Package – Complete sealing of the control panel and use of sealing rings on any conduit entries into the control panel
- Cold Weather Package – down to 33°F
- Freezer Package (32° F to -20° F) – specify minimum temperature
- Beacon Light with Red & Green Lens – indicates run, clear or fault conditions
- 30” film carriage – accommodates standard 20” and 30” wide films
- Dual Turntables – add second turntable to increase production.
- NOTE: Includes a Turntable Left-Right momentary selector switch with indicator lights to show the currently selected turntable and magnetic latching relay
LOAD CELL & SCALE PACKAGES:
- Platform Scale Package – SureWeigh Platform Scale with GSE250 Digital Weight Indicator
- NOTE: Machine with base extension option requires a factory quote
- Built-in Load Cells Scale Package – with GSE250 Digital Weight Indicator
- Note: Machine with base extension option requires a factory quote
- Platform Scale Package – for HP machine with OHPSB Split Base Frame option – SureWeigh 4’ x 4’ Platform Scale with GSE250 Digital Weight Indicator
- Upgrade digital weight indicator from GSE250 model to Matrix 365. The standard model GSE250 indicator is for load weight only and communication features are not available. Matrix 365 indicators have programming features for printers and communication capability
AIR FLOW & PALLET LOCK:
- AIR FLOW – film splitter – 20” – manual device to split a 20” roll of film into two (2) 10” wide webs, includes a manually adjustable roping device that “ropes” the film webs to the desired size before being applied to load.
- AIR FLOW – film splitter – 30” – manual device to split a 30” roll of film into three (3) 10” wide webs, includes a manually adjustable roping device that “ropes” the film webs to the desired size before being applied to load. Includes OP30 30” film carriage option.
- Pallet Lock Roping Device – the most effective method of securing the load to the pallet. Easily programmed using the touchscreen to apply the roped or normal full web film for additional holding force where needed, air flow if required and to prevent film breakage on sharp product or pallet corners. AIR REQUIRED – Includes a filter-regulator unit and loose-shipped quiet air compressor.
- Delete the filter-regulator unit and loose-shipped quiet air compressor included in option OPLRD if customer supplies the necessary pneumatic requirement.
