MISCELLANEOUS OPTIONS:
- Starter Spare Parts Kit – recommended minimum quantity of parts to stock for this specific machine
- Ramp for manual pallet jack loading – 48” W x 60” L
- NOTE: Powered pallet jacks may require a Porch Extension Option shown below.
- 24” L x 48” W Porch Extension – for powered pallet jacks
- 40” L x 48” W Porch Extension – for powered pallet jacks
- Tower Extension – for 110” wrap height capability (standard is 80”)
- NOTE: All machines with tower extensions will be hinged and shipped knocked-down.
- 1 ft. Base Extension – for maximum 119” diagonal (95” diagonal is standard)
- Dusty Package – Complete sealing of the control panel and use of sealing rings on any conduit entries into the control panel
- Cold Weather Package – down to 33°F
- Freezer Package (32° F to -20° F) – specify minimum temperature
- Beacon Light with Red & Green Lens – indicates run, clear or fault conditions
- 30” film carriage – accommodates standard 20” and 30” wide films
- Dual Turntables – add second turntable to increase production.
- NOTE: Includes a Turntable Left-Right momentary selector switch with indicator lights to show the currently selected turntable and magnetic latching relay
LOAD CELL & SCALE PACKAGES:
- Built-in Load Cells Scale Package – with GSE250 Digital Weight Indicator
- NOTE 1: If to be used with pallet jacks the OSCBIRMP Scale Ramp option is requiredNOTE 2: Machine with base extension option requires a factory quoteNOTE 3: Not legal for trade – upgrade available as a factory quote
- Built-In Load Cells Scale Package Ramp – 72” L x 48” W for use with built-in load cells
- Upgrade digital weight indicator from GSE250 model to Matrix 365. The standard model GSE250 indicator is for load weight only and communication features are not available. Matrix 365 indicators have programming features for printers and communication capability.
- 24” L x 48” W scale porch extension for use with built-in load cells
- 40” L x 48” W scale porch extension for use with built-in load cells
AIR FLOW & PALLET LOCK:
- AIR FLOW – film splitter – 20” – manual device to split a 20” roll of film into two (2) 10” wide webs, includes a manually adjustable roping device that “ropes” the film webs to the desired size before being applied to load.
- AIR FLOW – film splitter – 30” – manual device to split a 30” roll of film into three (3) 10” wide webs, includes a manually adjustable roping device that “ropes” the film webs to the desired size before being applied to load. Includes OP30 30” film carriage option.
- Pallet Lock Roping Device – the most effective method of securing the load to the pallet. Easily programmed using the standard Microprocessor and touchscreen to apply the roped or normal full web film for additional holding force where needed, air flow if required and to prevent film breakage on sharp product or pallet corners. AIR REQUIRED – includes a quiet, on-board air compressor.
- Pallet Lock Roping Device – Deduction for NO AIR COMPRESSOR or on-board compressor electrical outlet to be supplied.
